Commonwealth Fusion makes the physics case for its 400 MW reactor - Ars Technica
Skip to content
AI
Biz & IT
Cars
Culture
Gaming
Health
Policy
Science
Security
Space
Tech
Forum
Subscribe
Story text
Size
Small<br>Standard<br>Large
Width
Standard<br>Wide
Links
Standard<br>Orange
* Subscribers only
Learn more
Pin to story
Theme
Search
Sign In
Sign in dialog...
Text<br>settings
Story text
Size
Small<br>Standard<br>Large
Width
Standard<br>Wide
Links
Standard<br>Orange
* Subscribers only
Learn more
Minimize to nav
The scientific community has a plan for achieving fusion power. It involves getting a better understanding of how to control fusion in a tokamak-style reactor using the currently under construction ITER reactor, and then using that knowledge to build DEMO-style plants. But ITER isn’t even expected to see hot plasmas until the middle of the 2030s, by which point solar panels will be so cheap that we’ll probably all be getting them free in our cereal boxes.
Commonwealth Fusion is a startup that’s basically asking “what if we did that, but now?” Its ITER equivalent, a tokamak called SPARC, is over 70 percent complete and is planned to be operating as soon as next year. The company already has a site and customers for the power-generating follow-on, called ARC. Both of those projects are predicated on using high-temperature superconductors to generate an extremely powerful magnetic field that will allow the company to build a smaller reactor, and thus get things done faster.
Years of running plasmas through tokamaks has given us confidence that the basics of these plans are sound. But there are lots of potential devils in the details (otherwise there’d be little need for experimental reactors). So Commonwealth’s scientists, in collaboration with the academic community, have recently released five peer-reviewed papers that detail its plans for ARC: what our best models tell us now, and what we’ll still need to learn from SPARC to finalize the design of a production fusion plant.
The basics of ARC
The articles are all published in the Journal of Plasma Physics—they’re open access, so you can view them yourself, but they are long (roughly 30–40 page PDFs) and highly technical. What follows is an overview of some of what’s there and a few things that stood out to me as I went through them.
ARC will be a tokamak that hosts fusion between hydrogen’s two heavier isotopes, deuterium and tritium. This reaction results in a helium nucleus and releases a neutron and radiation. The helium transfers heat to the plasma, maintaining the conditions needed for fusion, but it is otherwise a waste product, referred to as “ash” in the fusion context. The neutron and radiation, however, are put to use.
Part of that use is simply imparting energy into a blanket of molten salt that surrounds the fusion chamber. That energy, in the form of heat, will be used to drive a turbine that produces the electricity. The molten salt includes lithium ions; when one lithium isotope absorbs a neutron, it decays into more helium, plus tritium that can be used as fuel for the reactor. There are isotopes present that will also release additional neutrons, allowing this process to generate sufficient fuel.
Overall, the present design of ARC is expected to produce about 1.13 GW of fusion power, with 500 MW of that extracted as electricity. Some of that (100 MW) will be needed to power the plant’s operations, leaving 400 MW to be sent to the grid.
The rest of the energy is either kept in the tokamak to maintain the fusion reactions or lost due to inefficiencies in the heat and energy transfer of the system. There’s a lot of uncertainty about these numbers; the 1.13 GW is just the center of a range of potential values running from 900 MW to 1.3 GW, so the 400 MW output may need to be adjusted up or down accordingly.
Some of that 400 MW comes during periods where fusion is not occurring. The nuclear reactions will occur within 15-minute-long periods that will be interspersed with one minute resets. The resets are meant to be kept short enough that nothing has much of a chance to cool down before it gets heated up again—thermal inertia will let it continue generating power. That will be one of the key differentiators with SPARC, which doesn’t have the heat extraction needed to maintain stable fusion for these long time periods, and so can’t maintain the near constant temperatures needed for reliable power generation.
It’s inevitable that parts of the device will be exposed to radiation and perhaps fusion plasma. The inner walls of the reactor will be shielded by tungsten, which will limit erosion by the conditions. Meanwhile, the vacuum vessel is designed to be replaced every one to two years. The papers note that this flexibility will allow them to make some design changes even after ARC is built. To enable this, the whole tokamak is meant to split in half for maintenance.
Instabilities
The two big uncertainties in the...