A new type of pixel | ETH Zurich

Homepage

Navigation

Search

Content

Footer

Contact

Sitemap

A new type of pixel

Materials science<br>Research

Researchers at ETH Zurich have developed pixels that can not only create images, but also analyse them. In the future, this could lead to the development of devices that function as camera and display at the same time.

24.06.2026

by

Oliver Morsch, freelance author

volume_upRead

mode_comment<br>Number of comments

The coloured logo was created using the new ETH researchers‘ Fourier pixels. The letter “E” is roughly 1 millimetre tall on the camera. (Image: Glauser YM, Vonk SJW, et al., Nature 2026)

In brief

Pixels create images on screens or capture them in cameras. Until now, however, there have been no pixels that could do both.

Researchers have now developed a new kind of pixel that can both create and analyse images and patterns.

In the future, these pixels could be used to realise two-way camera–displays.

In 1927, the term „picture element“, later abbreviated to „pixel“, appeared for the first time in the American technology magazine Wireless World. Today, pixels are everywhere: in computer screens and television sets, where they create colourful images; but also in cameras, where they capture images. In any case, however, they do one or the other—either they control light, as in the case of a display, or they analyse it in a camera sensor. Until now, there have been no pixels that could do both.

A research team led by David Norris, Professor at the Optical Materials Engineering Laboratory at ETH Zurich, has now developed such pixels for the first time. These pixels can both steer light and analyse it. Not only the intensity of the light, but also its oscillation phase and polarisation can be controlled and analysed. In the future, such so-called bidirectional pixels could lead, for instance, to the development of camera–displays that combine the two functions in a single device.

Patters and images from overlapping light waves

The new results, which have recently been published in the scientific journal external page Nature, are based on a fundamental physical effect: the so-called interference of light waves. When light is scattered by a surface, the waves originating from different points on the surface overlap. The shape of the surface determines the oscillation phases with which the waves propagate further. If the phases are equal, the light waves reinforce each other, but if they are opposed, the waves cancel out.

Norris and his collaborators use this effect to precisely control light with wave-shaped sculpted surfaces. They developed this processing method, which is precise to within a few nanometres, already a few years ago. For steering, the pixel—that is, the area on the chip where the material has been processed—first transforms the incoming light into a surface wave (a so-called surface plasmon polariton) propagating along the surface of the chip.

At a different position within the pixel, the surface wave is scattered back out of the material as a light wave. Through interference of the light waves, patterns and images can be created. Using mathematical Fourier analysis, the researchers can calculate what these images will look like and what kind of surface pattern is needed for a specific image.

Fourier pixel use surface waves, which are scattered out as light waves. These light waves interfere with each other and thus create patterns and images. Conversely, the same pixel can be used to analyse the intensity, phase and polarisation of incoming light waves. (Image: Glauser YM, Vonk SJW, et al., Nature 2026)

Controlling phase and polarisation

“In addition to light intensity, meaning the bright and dark areas from which images are created, our Fourier pixels can also control other properties of the light waves, for example their polarisation”, says doctoral student Yannik Glauser. Polarisation indicates the direction in which the electric field of the light wave oscillates. To generate light with an arbitrary polarisation direction, they use surface waves with different polarisations, which overlap on the Fourier pixel. The polarisation of the scattered light then depends on the surface shape of the pixel.

They can also precisely control the oscillation phase and thus, for instance, create light beams that have a hole in the middle—doughnut-shaped light beams, as it were. All of this even works with light of different wavelengths, so that coloured images can also be generated.

“We can also, however, apply the principle of interference and Fourier analysis in the opposite direction to analyse light using the Fourier pixel”, says postdoctoral researcher Sander Vonk. For instance, the researchers can make the oscillation phase of the light visible by superimposing the light wave and a reference wave on the pixel. They capture the interference pattern of the scattered light from both waves with a camera. From this pattern, they can...