Beamforming - Wikipedia

Jump to content

Search

Search

Donate

Create account

Log in

Personal tools

Donate

Create account

Log in

Beamforming

16 languages

العربية<br>Català<br>Deutsch<br>Español<br>Eesti<br>فارسی<br>Français<br>עברית<br>日本語<br>한국어<br>Norsk bokmål<br>Polski<br>Română<br>Русский<br>Українська<br>中文

Edit links

From Wikipedia, the free encyclopedia

Signal processing technique for sensor arrays

Part of a series onAntennas<br>Common types

Dipole

Fractal

Loop

Monopole

Satellite dish

Television

Whip

Components

Balun

Block upconverter

Coaxial cable

Counterpoise (ground system)

Feed

Feed line

Low-noise block downconverter

Passive radiator

Receiver

Rotator

Stub

Transmitter

Tuner

Twin-lead

Systems

Antenna farm

Amateur radio

Cellular network

Hotspot

Municipal wireless network

Radio

Radio masts and towers

Wi-Fi

Wireless

Safety and regulation

Wireless device radiation and health

Wireless electronic devices and health

International Telecommunication Union<br>(Radio Regulations)

World Radiocommunication Conference

Radiation sources / regions

Boresight

Focal cloud

Ground plane

Main lobe

Near and far field

Side lobe

Vertical plane

Characteristics

Array gain

Directivity

Efficiency

Electrical length

Equivalent radius

Factor

Friis transmission equation

Gain

Height

Radiation pattern

Radiation resistance

Radio propagation

Radio spectrum

Signal-to-noise ratio

Spurious emission

Techniques

Beam steering

Beam tilt

Beamforming

Small cell

Bell Laboratories Layered<br>Space-Time (BLAST)

Massive Multiple-input multiple-output (MIMO)

Reconfiguration

Spread spectrum

Wideband Space Division<br>Multiple Access (WSDMA)

Beamforming or spatial filtering is a signal processing technique used in sensor arrays for directional signal transmission or reception.[1] This is achieved by combining elements in an antenna array in such a way that signals at particular angles experience constructive interference while others experience destructive interference. Beamforming can be used at both the transmitting and receiving ends in order to achieve spatial selectivity. The improvement compared with omnidirectional reception/transmission is known as the directivity of the array.

Beamforming can be used for radio or sound waves. It has found numerous applications in radar, sonar, seismology, wireless communications, radio astronomy, acoustics and biomedicine. Adaptive beamforming is used to detect and estimate the signal of interest at the output of a sensor array by means of optimal (e.g., least-squares) spatial filtering and interference rejection.

Techniques<br>[edit]

To change the directionality of the array when transmitting, a beamformer controls the phase and relative amplitude of the signal at each transmitter, in order to create a pattern of constructive and destructive interference in the wavefront. When receiving, information from different sensors is combined in a way where the expected pattern of radiation is preferentially observed.

For example, in sonar, to send a sharp pulse of underwater sound towards a ship in the distance, simply simultaneously transmitting that sharp pulse from every sonar projector in an array fails because the ship will first hear the pulse from the speaker that happens to be nearest the ship, then later pulses from speakers that happen to be further from the ship. The beamforming technique involves sending the pulse from each projector at slightly different times (the projector closest to the ship last), so that every pulse hits the ship at exactly the same time, producing the effect of a single strong pulse from a single powerful projector. The same technique can be carried out in air using loudspeakers, or in radar/radio using antennas.

In passive sonar, and in reception in active sonar, the beamforming technique involves combining delayed signals from each hydrophone at slightly different times (the hydrophone closest to the target will be combined after the longest delay), so that every signal reaches the output at exactly the same time, making one loud signal, as if the signal came from a single, very sensitive hydrophone. Receive beamforming can also be used with microphones or radar antennas.

With narrowband systems the time delay is equivalent to a "phase shift", so in this case the array of antennas, each one shifted a slightly different amount, is called a phased array. A narrow band system, typical of radars, is one where the bandwidth is only a small fraction of the center frequency. With wideband systems this approximation no longer holds, which is typical in sonars.

In the receive beamformer the signal from each antenna may be amplified by a different "weight." Different weighting patterns (e.g., Dolph–Chebyshev) can be used to achieve the desired sensitivity patterns. A main lobe is produced together with nulls and sidelobes. As well as controlling the main lobe width (beamwidth) and the sidelobe levels, the position of a null can be controlled. This is...