A new 10" Raspberry Pi Touch Display 2, available now at $80 - Raspberry Pi
We use some essential cookies to make our website work.
We use optional cookies, as detailed in our cookie policy, to remember your<br>settings and understand how you use our website.
Accept optional cookies
Reject optional cookies
News
All news
Search the archive
RSS feed
Regular readers will be familiar with the 7″ Raspberry Pi Touch Display 2, which refreshed our original Touch Display product with a slimmer form factor and higher-resolution panel. Since its 2024 launch, we’ve released a 5″ variant, bringing the same high resolution and easy setup to a smaller footprint that suits more compact end devices and deployments.
Today, we are excited to go one step further — and three inches bigger — with the new 10″ Raspberry Pi Touch Display 2, available to buy now at $80.
Sometimes bigger is better
Physical size is not the only upgrade. Our new 10″ display features a higher 1200×1920–pixel resolution, a more generous 85-degree viewing angle, and a touchscreen controller with support for ten-finger touch, up from five-finger touch in the 5″ and 7″ variants.
As with all our display products, the 10″ Raspberry Pi Touch Display 2 integrates seamlessly with the rest of the Raspberry Pi ecosystem. It is powered directly from the host Raspberry Pi, and comes with all the necessary cables, connectors, and mounting hardware. The capacitive touchscreen benefits from full driver support in Raspberry Pi OS straight out of the box, with no manual calibration required — just hook it up to your host Raspberry Pi 5 or Raspberry Pi Compute Module (any model, with a Raspberry Pi Compute Module IO Board or another suitable motherboard) and go.
The 10″ Touch Display 2 is not compatible with Raspberry Pi 4 or earlier models, or with the Raspberry Pi Zero series. While previously released Touch Displays use only two lanes of DSI data to communicate with the host Raspberry Pi — which works well with the older display connector on Raspberry Pi 1, 2, 3 and 4 — the higher resolution of the new 10″ variant requires four DSI lanes. This in turn requires our narrower, but higher-bandwidth, ribbon cable and the newer display connector found only on Raspberry Pi 5 and the Compute Module IO boards. For display options you can use with earlier Raspberry Pi computers, take a look at the 5″ and 7″ variants of Raspberry Pi Touch Display 2, or consider the Raspberry Pi Monitor.
From dashboards to desktops to ambitious builds
The 10″ Raspberry Pi Touch Display 2 is a perfect fit for a wide range of applications, including home automation dashboards, kiosks, robotics interfaces, digital signage, gaming systems, workshop or lab equipment control panels, and more. We have no doubt you’ll find uses for it beyond anything we could possibly imagine.
The 10″ Raspberry Pi Touch Display 2 is available to buy now from our worldwide network of Raspberry Pi Approved Resellers.
Related posts
Raspberry Pi Touch Display 2 on sale now at $60
A new 5" variant of Raspberry Pi Touch Display 2
Secure Raspberry Pi Connect at scale
Small device, big business: can a Raspberry Pi replace your desktop PC?
Previous Post
AI Projects with Raspberry Pi — out now!
Share this post
Post to X
Post to Facebook
Post to Linkedin
Post to Pinterest
15 comments
Jump to the comment form
ukscone
22nd July 2026,
7:12 am
Very nice.
Do you know if any of the usual suspects are working on a case for it yet.
Reply to ukscone
Paul Webster
22nd July 2026,
7:31 am
From memory, this fulfils a very old commitment by Eben from around the time of the very first touch display release that a 10-inch variant would come.
If someone ran it at a lower resolution or with infrequent updates … could an adapter site between it and older RPi models to make it work?
Reply to Paul Webster
Paul Webster
22nd July 2026,
7:43 am
Old video from back at time of launch of first screen- in this one it is not a promise but a plan … 2:40 into the video. 11 years later and here we are!
Not a complaint at all just a recognition that some things take time.
https://youtu.be/ZHRhiCPXFIA?is=oQ5xKeQnaU01n7tw
Reply to Paul Webster
Dave Stevenson
22nd July 2026,
9:25 am
Sadly no, it can’t be run on 2 data lanes with earlier standard Pis. It will work on Compute Modules 1/3/4 on DISP1 though.
We did investigate 2 lane mode, but this display does a load of things within panel based on the video clock (even touch screen polling!), and it goes wrong in weird ways if it’s not getting a 60Hz overall refresh rate.
I’ll try to dig out my notes to see if we ever got it vaguely reasonable behaviour from it, but it will never be officially supported.
Reply to Dave Stevenson
Govert
22nd July 2026,
8:25 am
Pi + Active Cooler + M.2/SSD HAT does not have an easy power solution for the displays. Please make a nice plan for this – it’s the natural combination for a lovely little computer.
Reply to...