This glue bonds to nonstick surfaces and wipes clean with ethanol

-->

Advertisement

Close

Log in or create an account

Access thousands of C&EN articles

Get personalized recommendations

Follow your preferred chemistry topics

Save your favorite articles

Log In

Don't have an account?<br>Create one

Or

Access Through Institution

This glue bonds to nonstick surfaces and wipes clean with ethanol

Share

Save

News

Adhesives

This glue bonds to nonstick surfaces and wipes clean with ethanol

The environmental impact of the fluorinated molecule should be studied, outside experts say

by

Soumya Sagar, special to C&EN

July 16, 2026

min read

Share

Save

Save

CyclicFP-fmoc, with a large ring on the left with many F atoms and with three connected rings on the right." fetchpriority="high" decoding="async" data-hero-image="true"/><br>The structure of CyclicFP-fmoc, with a large ring on the left with many F atoms and with three connected rings on the right.

A new small-molecule glue can be removed with ethanol and used again.

News

The latest chemistry news, including important research advances, business and policy trends, chemical safety practices, career guidance, and more.

Read More

Materials scientists are on the hunt for an adhesive that binds strongly to diverse surfaces and can be easily removed and reused. Conventional polymers like epoxies achieve high strength through rigid, cross-linked networks, but they are brittle and prone to sudden, catastrophic failure under stress. Conversely, adhesives used in tapes offer ductility but lack the strength for heavy-duty bonding.

Small-molecule glues utilize noncovalent bonds for adhesion, allowing the glues to be removed easily and to leave pristine surfaces behind. But they too lack tough adhesion, which is achieved when a material has both high ductility and high adhesive strength.

Now researchers have developed a small-molecule glue that not only bonds strongly to nonstick surfaces but is easily removed with ethanol (J. Am. Chem. Soc. 2026, DOI: 10.1021/jacs.6c07886). “It combines adhesive strength and ductility together with easy washability, which is needed for recycling the adhesive as well as reusing the adhered objects,” Takuzo Aida, a polymer chemist at the University of Tokyo, says in an email.

The white crystalline adhesive, synthesized by Aida’s team, is a fluoro-crown ether phosphate called CyclicFP-fmoc. To test its adhesive strength, researchers first glued two untreated polytetrafluoroethylene (PTFE) plates by sandwiching molten CyclicFP-fmoc between them and letting it cool at room temperature for 10 min. The plates, glued to each other by a tiny contact patch of just 7 cm2, were able to hoist an 8 kg weight and registered a staggering 1.3 ± 0.1 MPa on lap-shear tensile tests, eclipsing the 0.1–0.7 MPa limits of commercial epoxies, acrylics, and silicones.

CyclicFP-fmoc binds to Teflon via strong, interfacial fluorine-fluorine (F–F) interactions, solid-state NMR spectroscopy confirmed. Meanwhile, the glue molecules hold on to each other inside the adhesive layer via hydrogen bonding between urethane units and π-π stacking of the fluorenyl rings.

Remarkably, a simple ethanol wash completely stripped CyclicFP-fmoc from the target PTFE plates, leaving no trace behind. The recovered adhesive proved repeatedly reusable, reliably maintaining its adhesive strength of ~1.2 ± 0.1 MPa across multiple cycles.

Two metal dumbbell-shaped weights hang by a hook from a white strip of material. The white strip is made of two pieces that overlap in the center.

Two polytetrafluoroethylene plates joined with a new glue, called CyclicFP-fmoc, are able to lift 8 kg of weight.

Credit:<br>Kohei Kikkawa

“Since ethanol is the main component of hand sanitizer, we believe it is possible to de-bond and recycle the adhesive by using hand sanitizer as a substitute in certain real-world situations,” Aida says. He explains that due to the noncovalent bonds, recycling the adhesive simply involves a breaking of those bonds, yielding the original monomer, which can be reused with no loss of adhesive strength. “In general, this can’t be achieved by using polymer adhesives,” he adds.

Mechanical engineer Alban Sauret and bioengineer Phillip Messersmith, who were not involved in the study, both stress that it is imperative to study this molecule’s environmental fate and impact before pressing it into service.

Sauret, at the University of Maryland, found the adhesive’s combination of strength, ductility, and ethanol removability “quite unusual.” “The removable and recyclable nature of the adhesive is promising, as we would reuse fluoropolymer parts instead of discarding them,” he says. He finds it likely to be a member of the family of per- and polyfluoroalkyl substances (PFAS) based on its fluorinated structure, “but whether it behaves like a problematic ‘forever chemical’ is a separate question.”

Messersmith, at the University of California, Berkeley, notes that...