Passive 3D Thermal “Cloak” Hides Objects from Heat, from Any Direction | Electronic Design Power"},"section_hierarchy":[{"id":66197,"name":"Technologies","alias":"technologies"},{"id":66115,"name":"Power","alias":"technologies/power"}],"taxonomy":[{"type":"Tag","name":"Thermotics","fullName":"Tag: Thermotics (4214856)","id":4214856},{"type":"Tag","name":"Heat flow","fullName":"Tag: Heat flow (4214855)","id":4214855},{"type":"Tag","name":"3D cloaking","fullName":"Tag: 3D cloaking (4214854)","id":4214854},{"type":"Tag","name":"Thermal cloak","fullName":"Tag: Thermal cloak (4214853)","id":4214853},{"type":"Tag","name":"Thermal modeling","fullName":"Tag: Thermal modeling (4213743)","id":4213743},{"type":"Tag","name":"Analog","fullName":"Tag: Analog (3262466)","id":3262466},{"type":"Tag","name":"Power","fullName":"Tag: Power (3262398)","id":3262398},{"type":"Tag","name":"University of Illinois Urbana-Champaign","fullName":"Tag: University of Illinois Urbana-Champaign (3223143)","id":3223143},{"type":"Tag","name":"Generic article","fullName":"Tag: Generic article (3130536)","id":3130536},{"type":"Tag","name":"Article","fullName":"Tag: Article (2329613)","id":2329613}],"authors":[{"id":21808966,"name":"Bill Schweber"}]}">

Power

Passive 3D Thermal “Cloak” Hides Objects from Heat<br>Implementing transformational “thermotics,” this 3D thermal cloak is based on a lattice-type of materials.<br>Bill Schweber

Related To:  Electronic Design

Aug. 21, 2026

4 min read

Add Us On Google

What you'll learn:

What are some applications for thermal cloaking and invisibility?

Why previous approaches were limited to two-dimensional cloaking.

How a new approach provides 3D cloaking.

University of Illinois/Urbana-Champaign

Nearly every system and circuit designer is concerned with two aspects of power: Getting enough of it to where it&rsquo;s needed, as well as dissipating the resultant heat so that individual components and the system don&rsquo;t go into thermal overload.<br>But there are two other aspects of thermal physics that sometimes are also critical:

Managing a heat source so that it&rsquo;s not visible to outsiders (thermal detection).

Ensuring external heat doesn&rsquo;t direct more heat onto a component.

Addressing these latter two issues, researchers at the University of Illinois/Urbana-Champaign have developed a technology for producing passive &ldquo;heat cloaks&rdquo; that render objects nearly invisible to thermal imaging (Fig. 1).

University of Illinois/Urbana-Champaign

1. These odd-shaped structures are some of the thermal cloaks the research team constructed and tested.

Note that this isn&rsquo;t just a thermal barrier preventing heat from reaching or leaving a target. Instead, it directs the flow of heat around the target object. (Although there are some outward similarities, don&rsquo;t confuse this thermal cloak with the well-known Romulan cloaking device of Star Trek — but then again, you never know what the future will bring!)<br>Past cloaking experiments have only worked in two dimensions or along a single direction of heat flow, far from the ideal of a true 3D cloak. Therefore, controlled heat only goes across flat surfaces or along one predetermined route. If heat approached from another direction, the temperature disturbance created by the hidden object could become visible.<br>Transformational Thermotics<br>To solve this problem, the team went back to the basic of transformational &ldquo;thermotics&rdquo; (for some reason, they chose this archaic term for what we now call thermodynamics). They asked, &ldquo;What kind of material structure could cover almost all of the thermal properties needed for a perfect cloak?&rdquo;<br>Their solution investigated and calculated how heat must travel around a protected region to make the surrounding temperature field look unchanged. The idea is similar to rerouting an electrical or water-flow current around an obstacle and reconnecting it on the other side without leaving an obvious disruption.<br>Their implementation is based on a new type of lattice-type material that can be fully adjusted in three directions. By tuning these dimensions, the researchers could precisely control how well different regions conduct heat. This design covers a much wider range of thermal conductivities than previous approaches — sufficient to closely match the theoretical requirements for ideal cloaking.<br>They used advanced CAD and thermal-modeling tools to calculate how heat must travel around a protected region to make the surrounding temperature field look unchanged. The challenge was turning that mathematical prescription into a structure that could be manufactured. Different regions of the cloak needed carefully selected thermal conductivities, meaning they had to move heat at different rates and along different directions.<br>Implementation and Test Results<br>The team&rsquo;s thermal cloak isn&rsquo;t just a computer model — it has been physically fabricated and tested. The device is a hybrid...